Why a Two-Prong Bilame Corkscrew Works on Old Corks
Old wine corks become brittle and crumble easily. A traditional screw corkscrew can push the cork into the bottle or break it apart. The two-prong bilame corkscrew, like the Two-Prong Corkscrew Bilame Chrome from L’Atelier du Vin, slides between the cork and the glass, gripping the cork along its length without piercing it. This makes it ideal for fragile corks that need a gentle touch.
What the Two-Prong Bilame Chrome Offers
- Two-Prong Corkscrew Bilame Chrome | L’Atelier du Vin: Two-prong corkscrew Bilame Chrome in polished metal, crafted in France. Designed for precise, clean extraction of delicate corks. The polished metal prongs are thin enough to slide between cork and bottle neck, reducing the risk of crumbling. French craftsmanship adds confidence in durability.

Two-Prong Corkscrew Bilame Chrome | L’Atelier du Vin
How to Extract a Fragile Cork Step by Step
Follow these steps carefully. The bilame technique requires patience and a steady hand.
- 1. Insert the first prong: Hold the bilame corkscrew with the prongs aligned vertically. Gently insert the longer prong between the cork and the bottle neck at a slight angle. Rock it slowly until it reaches the bottom of the cork.
- 2. Insert the second prong: Slide the second prong in on the opposite side of the cork, again between cork and glass. The prongs should now flank the cork, one on each side.
- 3. Grip and twist: Once both prongs are fully inserted, gently rock the handle back and forth while pulling upward. The prongs grip the cork evenly, allowing it to slide out intact.
- 4. Remove the cork: Continue the rocking motion until the cork releases. Pull straight up. If resistance increases, rock more, do not force.
Honest Trade-Offs of the Bilame Method
The two-prong bilame corkscrew requires more care and practice than a standard waiter’s corkscrew. It works best on corks that are still somewhat intact; a completely disintegrated cork may still crumble. The technique is slower, but for old or fragile corks, it is often the only way to avoid pushing the cork into the bottle. The polished metal prongs are delicate, so avoid bending them by using excessive force.

